Email  Web Links   Contact Us
 
 
 
  
  
KORacing Products
*Holley EFI*
*LINK ECU*
*Services*
All Makes/Misc. Parts
Apparel
Mazda Miata
Toyota Celica Alltrac
Toyota MR2 MK2
Accessories
Clutch & Transaxle
Cooling System
Electronics & Tuning
Engine Builds
Engine Components
Exhaust
Fueling & Injection
Gen 4 Caldina Swap Parts
Ignition
Induction / Intercooler / BOV
Intake
OEM parts
Suspension & Brakes
Turbo Kits & Accessories
Toyota Supra MK4
Toyota Tacoma
Used Parts / Garage Sale
z Remote Tuning, Misc. Labor/Shipping
Valves GSC Power Division 3SGTE
KORacing Products » Toyota MR2 MK2 » Engine Components

GSC Stainless steel valves for the 3SGTE engine.

When creating our new valve line we set out to create the best performance longest lasting valves available to the aftermarket. Using advanced 3D design and simulation programs we have created a stronger and higher flowing valve head design. We flow test prototype valve heads in the specific applications to make sure we have the highest flowing valve head available on the market today. With the materials used we have less valve distortion at the face than any of the tested designs. Less distortion allows or better sealing under extreme conditions and more consistent performance threw the life of the valve. GSC Power-Division's new valves are sure to become the industries standard for sport compact performance valves.

    Valve Features
  • Swirl polished heads for smoother air flow over the valve
  • Back cut to reduce valve weight for higher rpm, higher boost pressure and allow for more aggressive cam profiles without increasing valve spring seat pressures.
  • Valve stems are micropolished to allow for less oil retention on the stem which creates less drag on the stem to guide for a smoother motion.
  • Intake valves are a modified 21-4n stainless and Exhausts are a modified 23-8n stainless material for high heat capacity while maintaining longevity.
  • Valve tips are either hardened or have a stelite wafer tip fused so that the tip is within 5 Rockwell C of the rocker or valve tappet for extended life and less wear
  • Valve tip lengths. We have taken extra time to adjust tip heights on the applications to require less tipping of the valve to maintain proper tip height for proper valve train geometry, and to cut down on install times when setting valve lash.
  • We have also adjusted the Keeper grove to properly balance intake and exhaust spring pressures to reduce the use of valve spring shims and maximize performance from our spring and retainer kits.
  • Valves will work with an oem keeper/lock or when available our upgrade keeper/lock. It's not mandatory but it is suggested that any valve lock not be reused on performance applications do to material grooving.

$270.00 per set of 16 valves
Select Valve Size:
 

© 2002-2022 KO Racing, Inc.
Privacy Policy
Orders/Returns Policy
 
We accept »
Products Technical Articles Installs Loki Testimonials Photo GalleryMovie Clips
[ Email ]   [ Web Links ]   [ Contact Us ]   [ Home ]   [ Admin Logon ]
This is an information only web site. We do not collect, retrieve or store any information from this site