We did have to shorten the pipe a bit, but even so, this entire setup is a bit longer than the original parts, so it may have trouble clearing on cars equiped with the Apex'i intake, though we have been able to get the intake to fit with minor modification of the Apex'i brackets. The Blitz intake for the MR2 also has fitment issues with this as the Blitz bracketry, and one customer had to install a second 45deg hose to install the intake with the Blitz unit.
This is for 2nd Generation MR2's only with 3SGTE's.
Note: the ports on this intake are not in the exact same location as the stock ports and may require you to use longer or different hoses to make the connections. The BPV or BOV connection is 1 1/8" -- you should be able to use 35mm silicone hose here or possibly 1 1/4" hose with a good hose clamp to make this connection.
These are made to order. 1-2 weeks