The pipes are heavy duty 16 gage 2.5" 304 stainless steel pipes TIG welded together by KO Racing with large beads rolled in the end to prevent blowing them off under boost. The clamps used are constant tension fully lined worm drive clamps made from stainless steel as well. These heavy duty clamps evenly clamps around their entire circumference and the spring packs on the adjustment screws maintain that tension through all temperature and pressure extremes. The fan is a Spal(TM) 7.5" electric fan; one of the best performing fan manufacturers in the market under real world conditions (others claim higher performance at no load -- but a fan never operates under no load).
The way these pipes are routed allows the use of the widely popular TRD strut tower brace. This kit does include all piping from the turbo to the intercooler and from the intercooler to the throttle body.
*Note: You will need to wire the fan to your stock wiring as the plug won't match. Blue is positive, black is negative on the provided fan.
*NOTE: These are made to order. The standard lead time is 3-4 weeks to fabricate.