Email  Web Links   Contact Us
 
 
 
  
  
KORacing Products
*Services*
All Makes/Misc. Parts
Diesel Performance
Dodge/Chrysler/Jeep Performance Vehicles
Mazda Miata
Subaru
Toyota Celica Alltrac
Clutch & Transaxle
Cooling System
Electronics & Tuning
Engine Builds
Engine Components
Exhaust
Fueling & Injection
Ignition
Intake
Intercooler / BOV
OEM Parts
Suspension & Brakes
Turbo Kits & Accessories
Toyota MR2 MK1
Toyota MR2 MK2
Toyota Supra MK3
Toyota Supra MK4
Toyota Tacoma
Used Parts / Garage Sale
Volkswagen
Shimless Bucket from 1ZZFE
KORacing Products » Toyota Celica Alltrac » Engine Components

High RPM upgraded valve "lifter" to replace factory shim on bucket or shim under bucket 3SGTE and 2JZGTE valve lash adjusters. No shim to pop out in the event of valve float means no possibliilty of shim related valvetrain failure even at 9000RPM! The shimless buckets also reduce weight over their shimmed counterparts by as much as 35.5%.

Recommended for engines revving over 8000rpm.

Each bucket number is an indication of size. The number printed on the bottom side of the bucket is the tenths, and hundredths place indicating the bucket thickness plus 5.00mm. For example: a "42" bucket is 5.42mm thick.

Determining the bucket size you need: Measure the valve lash clearance with your standard lifter or shim and bucket combination using feeler gauges. Recommended intake cam to bucket clearance range is .006 to .010", and exhaust is .008 to .012". Now remove your shim and bucket combination and measure the total thickness with a micrometer. If your clearance was perfect, order that thickness bucket, if your clearance was outside the range, add or subtract the difference from your bucket and shim thickness and order that bucket.

Example: Intake valve cylinder 1 nearest cam gear (1A) measures .004" clearance, and the next over valve on cylinder 1 (1B) measures .009". The bucket and shim thickness for 1A is 0.2109" thick, and the shim and bucket thickness for 1B is .2218". With 25.4mm per inch, 1A is (.2109x25.40)=5.356mm and 1B is (.2218x25.40)=5.634mm. So you would need a #36 bucket for 1A to maintain the same clearance, and a #64 for 1B. Because 1A was under the recommended range, we must use a thinner than recommended bucket. Ideal clearnce on the intake is exactly in the middle of the range or .008". Subtracting our measured clearance from ideal (.008-.004)=.004 is how much we need to subtract from the bucket thickness to get the proper size to achieve ideal clearance. Thus the 1A bucket should be ((.2109-.004)*25.40)=5.255mm or a #26 bucket.

NOTE: Shimless buckets *WILL* work with 3rd generation shim under bucket retainers.


$16.50 per Bucket
Select Bucket Number:
 

© 2002-2017 KO Racing, Inc.
Privacy Policy
Orders/Returns Policy
 
We accept »
Products Technical Articles Installs Loki Testimonials Photo GalleryMovie Clips
[ Email ]   [ Web Links ]   [ Contact Us ]   [ Home ]   [ Admin Logon ]
This is an information only web site. We do not collect, retrieve or store any information from this site